2009 December 25 | 1929fordhotrod.com

Archive for December 25th, 2009

Merry Christmas to all Hot Rodders

Friday, December 25th, 2009

Merry Christmas to all Hot Rodders, custom car builders, and vintage car folks. Best wishes to all.

Merry Christmas

You can look forward to many more posts on building a 1929 Ford Roadster Hot Rod.

Cheers,

1929fordhotrod.com

Tags: Angel, Merry Christmas
Posted in Uncategorized | No Comments »

Subscribe to 1929fordhotrod.com
Enter your email address:
Delivered by FeedBurner
Your donations are appreciated
Pages
- About
- Contact Me
- 1928 – 31 Model A Ford frame dimensions
- 1930 Plymouth parts I removed and sold
- FOR SALE – Vintage Rolls-Royce publications from the 1920′s
- Preview of the 1929 Ford chassis with C4 Corvette suspension
- Products Page
Contact Me Using Skype
1929 Ford Hot Rod Products
- Custom 1928 to 31 Model A Ford Chassis Plans using C4 Corvette Suspension Componensts
- Stock 1928 to 31 Model A Ford Chassis Plans
A calendar of 1929 Ford Hot Rod posts
December 2009

S M T W T F S

« Nov Jan »

1 2 3 4 5

6 7 8 9 10 11 12

13 14 15 16 17 18 19

20 21 22 23 24 25 26

27 28 29 30 31
Search the 1929 Ford Hot Rod site

Search for:
Slideshow
1929 Ford Hot Rod Topics
- 1928-31 Model A Ford halogen headlight conversion
- 1929 Ford Roadster Body Modifications
- A Corvette engine for the 1929 Model “A” Ford Roadster Hot Rod
- A Steering Column for the Hot Rod
- Automotive Swap Meets
- Brookville Roadster – Great reproduction Ford bodies & parts
- Building a brake pedal assembly
- Building an Engine Pre-oiler
- Buying parts for your Hot Rod project
- C4 Corvette vacuum power brake booster
- Car Show & Cruises
- Chassis / Frame Design for the 1928 to 31 Model “A” Ford Street Rod
- Distraction while build a hot rod
- For Sale
- Having Fun
- Hot Rod Brake Lines
- Hot Rod Project Management 101
- Hot Rod Street Rod Rat Rod Custom Car Links
- In-expensive Hot Rods
- Model A Ford Body Topics
- Model A Ford Parts & Resource Links Page
- Money making distractions
- Mounting the Transmission into the 1929 Ford Model “A” Roadster Hot Rod
- My 1987 Corvette Convertible
- Polishing aluminum
- Power steering
- So you want to build a hot rod
- The 1929 Ford Roadster Body
- The 1931 Ford Model “A” 5 window coupe
- The Front Suspension for the 1929 Ford Roadster
- The money making game on eBay
- The Rear Suspension for the 1929 Ford Roadster
- Uncategorized
- Welcome back and hello 2010
Check out the older 1929 Ford Hot Rod posts on this Blog. Lots of great information.
- January 2012
- December 2011
- November 2011
- May 2011
- April 2011
- March 2011
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
Links
- 1929fordhotrod.com videos on YouTube
- 1986 Corvette
- 1986 Corvette Frame Dimensions
- Atchison Machine Service Inc.
- Atchison Racing
- Bristol Hotrods, England
- Brookville Roadster
- C4 Corvette Registry
- Canadian Rodder
- Cookingfromthehip.com
- Custom Car Builders
- Fleetwood Country Cruizein 2010
- Hot Rod Magazine
- Hot Rods and Classics
- Hotrodders.com
- Mike Siewert's Rod Links
- Northside Choppers
- Old Autos Newspaper
- Roadsters.com
- Rod & Custom Magazine
- Street Rod USA
- Street Rodder Magazine
- Throttle Gals Magazine
- Top 100 Hot Rod Sites.com
Link Master
Globe of Blogs
Tags
1928 - 31 Ford Model A frame 1928 - 31 Model A Ford chassis considerations 1928 - 31 Model A Ford frame considerations 1928-29 Ford Roadster 1929 Ford chassis 1929 Ford hot rod 1929 Ford Model A body modifications 1930 plymouth 1931 ford 1931 Ford 5 Window coupe 1931 plymouth 1986 Corvette 1986 Corvette Indy Pace car 1987 Corvette 1987 Corvette engine American Griffiti Brookville Roadster Build a hot rod build a hot rod frame buying hot rod parts C4 Corvette hot rod front suspension C4 Corvette hot rod suspension c4 corvette irs c4 corvette suspension Canada's Largest Outdoor Car Show Car building distractions Car Cruise In Car Shows Cruise In custom car building eBAy Fleetwood Country Cruise In Fleetwood Country Cruize In For Sale George Barris hot rod Hot Rod distractions Merry Christmas Model A Ford Old Autos Outdoor car show problems when building a hot rod rat rod Steve Plunkett Swap meets
1929fordhotrod
- Installing the 1986 C4 Corvette steering column in the Hot Rod
- Mounting the C4 Corvette Vacuum Assisted Power Brake Booster in the Hot Rod
- Merry Christmas – Birds of a Feather Christmas Video
- Designing a brake pedal assembly for the1928 – 31 Model A Ford
- A different idea for 1928 – 31 Model A Ford floors
- GM Type II Power Steering pump for the 1929 Ford hot rod
- 1928-31 Model A Ford Halogen Headlight Conversion
- What’s happening at 1929fordhotrod.com
- London / Lambeth Ontario Spring Swap Meet June 12th 2011
- Waterdown Ontario Spring Swap Meet & Car Show May 28th & 29th 2011

December 2009
S	M	T	W	T	F	S
« Nov		Jan »
	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31

SEO Powered by Platinum SEO from Techblissonline

Chassis / Frame Design for the 1928 to 31 Model “A” Ford Street Rod – Part 5 Now it came time to work on what I thought was the most difficult part of the chassis, the front suspension. For the first attempt at this I decided to use exactly the same wheel base as the stock Model A Ford from 1928 to 1931. The front of the frame rails already had the same shape as the stock frame. The only difference was that my frame rails were made of 2” x 4” x 0.1” rectangular tubing. This would make a much more robust frame or chassis. You have to remember the original Model A Ford from 1928 to 1931 did not have much horsepower. I will be using a stock 1986 Corvette engine with over 200hp and over 200 ft-lbs of torque. This is a very important consideration in the hot rod frame or chassis design. The stock Model A Ford from 1928 to 1931 also had all of the cross members riveted to the side of “C” channel frame / chassis rails. Over 70 years these rivets loosen and the general strength of the frame / chassis will be compromised. The frame / chassis I will be designing will not used rivets or “C” channel side rails. All of the required cross members will be welded to the rectangle 2” x 4” x 0.1” rectangular side frame / chassis rails. Just pick up an original Model A Ford from 1928 to 1931 and watch it flex. The hot rod frame / chassis I am designing, using the C4 Corvette suspension components will not have the same flexing issues. Amazon.ca Widgets [caption id="attachment_195" align="aligncenter" width="400" caption="C4 Corvette front cross member stripped down and ready to have measurements taken from. The new street rod cross member will not look anything like this."][/caption] I needed to measure everything you could possibly imagine on the C4 Corvette front suspension cross member. The cross memeber comes out of the Corvette as a complete unit. In my case, it was removed from a 1986 Corvette Indy Pace car convertible. I am sure that the Corvette engineers never dreamed of seeing their cars put to this use. Corvette suspensions used in hot rods and custom cars. [caption id="attachment_262" align="aligncenter" width="421" caption="C4 Corvette front suspension mock up for a 1928 to 1931 Model A Ford hot rod chassis / frame. View # 1"][/caption] The obvious starting point would be to measure the width of the C4 Corvette front cross member at the point where the upper control arms are attached. This measurement was slightly wider than the stock Model A Ford frame / chassis from 1928 to 1931 at the front wheel base center line. I thought that I would mount the controls arms in a similar fashion as the stock C4 Corvette did. It seemed reasonable to make brackets that would mount to the outside edge of the new frame or chassis rails. This meant making the frame slightly wider. In order to make sure this would not create a problem or look terrible when the body was mounted onto the frame, I widen the front frame and quickly lifted the body on to the frame. At that point I realize this would all work out perfectly. [caption id="attachment_263" align="aligncenter" width="421" caption="C4 Corvette front suspension mock up for a 1928 to 1931 Model A Ford hot rod chassis / frame. View # 2. An old Jaguar rear end coil over shock was place to visualize possible mounting schemes."][/caption] Now I needed to establish the front ride height. Having the entire C4 Corvette front cross member dimensions in hand, it came time to mock up the front suspension. Using some 6” x 6” x 0.25” angle iron as temporary front cross member for the lower control arms was created. The width of the lower part of the cross member was matched to the inside mounting width of the lower control arms removed from the C4 Corvette. It was assembled using c-clamps and tack welded in place. A bracket was created for the upper control arms using angle iron. I clamped these brackets to the top the of the frame rails. Now it came time to mount the C4 Corvette front suspension parts onto the frame mock up and see how everything would like. Remember, humans are very visual, and since I am a professor, I realized that most of what we learn or process would be through our eyes. The brain tends to process the visual information much easier and faster. This is why I needed to mount the rims with tires to the suspension and have the body sitting on the frame. I would quickly see how everything would look. I even used an old Jaguar rear coil over shock to visualized possible mounting schemes for it. [caption id="attachment_264" align="aligncenter" width="419" caption="C4 Corvette front suspension mock up for a 1928 to 1931 Model A Ford hot rod chassis / frame. View # 3 showing the complete temporary set-up for the front suspension."][/caption] The set up for the front suspension is all very temporary, and is only used to evaluate the ride height and overall look on the hot rod frame / chassis. Come back next week to see how this progresses more towards the final product and finished state. Of course you can have an advanced look at the completed hot rod frame / chassis for my 1929 Ford Roadster. Just go the “PAGES” section new the top right of the screen and click on “Preview of the 1929 Ford Chassis with C4 Corvette suspension. This frame / chassis will work for any Model A Ford from 1928 to 1931.

Archive for December 25th, 2009

Merry Christmas to all Hot Rodders

Subscribe to 1929fordhotrod.com

Your donations are appreciated

Pages

Contact Me Using Skype

1929 Ford Hot Rod Products

A calendar of 1929 Ford Hot Rod posts

Search the 1929 Ford Hot Rod site

Slideshow

1929 Ford Hot Rod Topics

Check out the older 1929 Ford Hot Rod posts on this Blog. Lots of great information.

Links

Tags

1929fordhotrod