Hot Rod Street Rod Rat Rod Custom Car Links

Archive for the ‘Hot Rod Street Rod Rat Rod Custom Car Links’ Category

Hot Rod, Street Rod, Rat Rod, or Custom Car Links

Thursday, June 17th, 2010

Hot Rod, Street Rod, Rat Rod, or Custom Car Links

I am looking for any relevant website that would like me to list their Website on http://1929fordhotrod.com. All I ask in return is a link for http://1929fordhotrod.com in your Website. Your link will be on a special links page in my site and also be included on the sidebar of my mainpage. Use the contact buttom below to submit the details of your Website.

Tags: Custom Car Links, Hot Rod Links, Rat Rod Links, Street Rod Links
Posted in Hot Rod Street Rod Rat Rod Custom Car Links | No Comments »

Subscribe to 1929fordhotrod.com
Enter your email address:
Delivered by FeedBurner
Your donations are appreciated
Pages
- About
- Contact Me
- 1928 – 31 Model A Ford frame dimensions
- 1930 Plymouth parts I removed and sold
- FOR SALE – Vintage Rolls-Royce publications from the 1920′s
- Preview of the 1929 Ford chassis with C4 Corvette suspension
- Products Page
Contact Me Using Skype
1929 Ford Hot Rod Products
- Custom 1928 to 31 Model A Ford Chassis Plans using C4 Corvette Suspension Componensts
- Stock 1928 to 31 Model A Ford Chassis Plans
A calendar of 1929 Ford Hot Rod posts
February 2012

S M T W T F S

« Jan

1 2 3 4

5 6 7 8 9 10 11

12 13 14 15 16 17 18

19 20 21 22 23 24 25

26 27 28 29
Search the 1929 Ford Hot Rod site

Search for:
Slideshow
1929 Ford Hot Rod Topics
- 1928-31 Model A Ford halogen headlight conversion
- 1929 Ford Roadster Body Modifications
- A Corvette engine for the 1929 Model “A” Ford Roadster Hot Rod
- A Steering Column for the Hot Rod
- Automotive Swap Meets
- Brookville Roadster – Great reproduction Ford bodies & parts
- Building a brake pedal assembly
- Building an Engine Pre-oiler
- Buying parts for your Hot Rod project
- C4 Corvette vacuum power brake booster
- Car Show & Cruises
- Chassis / Frame Design for the 1928 to 31 Model “A” Ford Street Rod
- Distraction while build a hot rod
- For Sale
- Having Fun
- Hot Rod Brake Lines
- Hot Rod Project Management 101
- Hot Rod Street Rod Rat Rod Custom Car Links
- In-expensive Hot Rods
- Model A Ford Body Topics
- Model A Ford Parts & Resource Links Page
- Money making distractions
- Mounting the Transmission into the 1929 Ford Model “A” Roadster Hot Rod
- My 1987 Corvette Convertible
- Polishing aluminum
- Power steering
- So you want to build a hot rod
- The 1929 Ford Roadster Body
- The 1931 Ford Model “A” 5 window coupe
- The Front Suspension for the 1929 Ford Roadster
- The money making game on eBay
- The Rear Suspension for the 1929 Ford Roadster
- Uncategorized
- Welcome back and hello 2010
Check out the older 1929 Ford Hot Rod posts on this Blog. Lots of great information.
- January 2012
- December 2011
- November 2011
- May 2011
- April 2011
- March 2011
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
Links
- 1929fordhotrod.com videos on YouTube
- 1986 Corvette
- 1986 Corvette Frame Dimensions
- Atchison Machine Service Inc.
- Atchison Racing
- Bristol Hotrods, England
- Brookville Roadster
- C4 Corvette Registry
- Canadian Rodder
- Cookingfromthehip.com
- Custom Car Builders
- Fleetwood Country Cruizein 2010
- Hot Rod Magazine
- Hot Rods and Classics
- Hotrodders.com
- Mike Siewert's Rod Links
- Northside Choppers
- Old Autos Newspaper
- Roadsters.com
- Rod & Custom Magazine
- Street Rod USA
- Street Rodder Magazine
- Throttle Gals Magazine
- Top 100 Hot Rod Sites.com
Link Master
Globe of Blogs
Tags
1928 - 31 Ford Model A frame 1928 - 31 Model A Ford chassis considerations 1928 - 31 Model A Ford frame considerations 1928-29 Ford Roadster 1929 Ford chassis 1929 Ford hot rod 1929 Ford Model A body modifications 1930 plymouth 1931 ford 1931 Ford 5 Window coupe 1931 plymouth 1986 Corvette 1986 Corvette Indy Pace car 1987 Corvette 1987 Corvette engine American Griffiti Brookville Roadster Build a hot rod build a hot rod frame buying hot rod parts C4 Corvette hot rod front suspension C4 Corvette hot rod suspension c4 corvette irs c4 corvette suspension Canada's Largest Outdoor Car Show Car building distractions Car Cruise In Car Shows Cruise In custom car building eBAy Fleetwood Country Cruise In Fleetwood Country Cruize In For Sale George Barris hot rod Hot Rod distractions Merry Christmas Model A Ford Old Autos Outdoor car show problems when building a hot rod rat rod Steve Plunkett Swap meets
1929fordhotrod
- Installing the 1986 C4 Corvette steering column in the Hot Rod
- Mounting the C4 Corvette Vacuum Assisted Power Brake Booster in the Hot Rod
- Merry Christmas – Birds of a Feather Christmas Video
- Designing a brake pedal assembly for the1928 – 31 Model A Ford
- A different idea for 1928 – 31 Model A Ford floors
- GM Type II Power Steering pump for the 1929 Ford hot rod
- 1928-31 Model A Ford Halogen Headlight Conversion
- What’s happening at 1929fordhotrod.com
- London / Lambeth Ontario Spring Swap Meet June 12th 2011
- Waterdown Ontario Spring Swap Meet & Car Show May 28th & 29th 2011

February 2012
S	M	T	W	T	F	S
« Jan
	1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29

SEO Powered by Platinum SEO from Techblissonline

Chassis / Frame Design for the 1928 to 31 Model “A” Ford Street Rod – Part 6 One of my main goals in the design for the 1928 to 31 Model A Ford Street Rod chassis / frame was to incorporate as many of the 1986 C4 Corvette suspension components as possible. Initially, I even wanted to use the front mono composite spring from the Corvette. This spring is huge and at the time did not seem like a practical idea. Having acquired a variety of automotive parts over a short period of time, I had sitting in the shop, 4 Jaguar coil over shocks. The distance between the mounting holes was prefect for my application. These shocks came from the rear end of a mid 1980’s full size Jaguar Sovereign 4 door car. The Jaguar Sovereign is a heavy car, and my 1929 Ford Roadster hot rod would be much lighter. I thought there might be a possibility to use the coil over shocks on my hot rod. Temporary mounting brackets were made for the shocks. The motor and transmission were temporarily mounted into the hot rod chassis / frame. I even added several bags of sand for added weight. The shocks were mounted to the front of the new 1928 to 31 Model A Ford Street Rod chassis / frame. I measured the ground clearance for a reference point then stood on the chassis and started bouncing my 6’-4”, 250 pound body up and down on the chassis as hard as I could. Very little movement was observed. It was then I realized that I could save a bit of money for the time being and use the Jaguar coil over shocks in the front of my 1929 Ford Roadster. Later on, once the car is on the road, I do intend to replace these shocks with nice and shiny chrome coil over shocks. [caption id="attachment_290" align="aligncenter" width="420" caption="C4 Corvette upper control arm mount for a 1928 - 1931 Ford Model A Hot Rod - the upper control arm mount is tack welded in place and the lower right angle cross member gussets have be installed."][/caption] Everything is starting to come together nicely with the front 1986 C4 Corvette suspension for the 1928 to 31 Model A Ford Street Rod chassis / frame. The front suspension mock up produced favourable results with the desired ride height. Not only that, all of suspension components taken from the1986 C4 Corvette look great on the new hot rod frame. Now it came time to create a proper chassis cross member, and the required mounting brackets for the front suspension. [caption id="attachment_291" align="aligncenter" width="421" caption="C4 Corvette upper control arm mount for a 1928 - 1931 Ford Model A Hot Rod - inside view - the shocks are mounted and tested to determine if the spring rate is adequate."][/caption] For the cross member I used 2” x 4” x 0.1” rectangular tubing, heavy wall 1.25” round tubing for the lower control arm mounts, and 0.25” plate steel for the upper control arm mounts. Inside the 1.25” heavy wall round tubing, bronze bushings were pressed into each end providing an inner diameter of 0.5” for the lower control arm mounts. Originally the lower control arms were fastened to the 1986 C4 Corvette cross member with metric bolts about 3” long for each pivot point on the lower control arms. I did notice a minor amount of wear on the original C4 Corvette cross member mount holes for the lower control arms. The design for my hot rod will allow for sealed lubrication in the lower control arm cross member round tubes eliminating wear problems. The only thing left to do, is enlarge the inside bushing diameter of the C4 Corvette lower control arms. This was accomplished very carefully, using a 0.5” cobalt drill bit. High speed drill bits will not work for this task. [caption id="attachment_292" align="aligncenter" width="421" caption="C4 Corvette upper control arm mount for a 1928 - 1931 Ford Model A Hot Rod - inside view showing the gussets for the upper control arm brackets."][/caption] Wanting a strong chassis / frame, one that will not flex when picked up by one corner of the chassis, I welded in right angle gussets from the lower front cross member to the inside of the frame rails. Scraps of 2” x 4” rectangular tubing was used for this job. Now this created a minor problem for the stock 1986 C4 Corvette steering rack. The steering rack and the intermediate steering shaft needed a bit of clearance space notched out of the right angle gussets I just welded into the cross member / chassis. To solve the problem, a very small section of round exhaust tubing was moulded into the gusset. This took a few hours to do and make it look nice. [caption id="attachment_293" align="aligncenter" width="281" caption="C4 Corvette upper control arm mount for a 1928 - 1931 Ford Model A Hot Rod - inside view showing the gussets for the upper control arm brackets. Now a bit of grinding is in order to make everything smooth."][/caption] Work on the upper control arm brackets started. Using the plasma cutter, and a wooden template, I cut out 2 identical brackets. The plasma cutter produces a very clean cut, so it didn’t take too long finishing the edges of these brackets. The highest part of these brackets would stand a little more than 4” from the top of the frame rail. Again, wanting everything very strong, I fabricated gussets to strengthen the upper control arm brackets to the frame / chassis. [caption id="attachment_294" align="aligncenter" width="283" caption="C4 Corvette upper control arm mount for a 1928 - 1931 Ford Model A Hot Rod - inside view showing the exhaust tubing massaged into the cross member. This is required to have the proper clearance for the 1986 C4 steering rack and intermediate shaft."][/caption] Now it was time to weld everything in place. [caption id="attachment_295" align="aligncenter" width="280" caption="C4 Corvette upper control arm mount for a 1928 - 1931 Ford Model A Hot Rod - outside view showing my first version of the upper mount for the coil over shock. I didn't like the way this looked and ended up removing it."][/caption] Come back next week to see how this progresses more towards the final product and finished state. Of course you can have an advanced look at the completed hot rod frame / chassis for my 1929 Ford Roadster. Just go the “PAGES” section new the top right of the screen and click on “Preview of the 1929 Ford Chassis with C4 Corvette suspension. This frame / chassis will work for any Model A Ford from 1928 to 1931. I am currently working on CAD drawings for this entire chassis complete with template drawings for all brackets. This will be available soon on this WEB site.

Archive for the ‘Hot Rod Street Rod Rat Rod Custom Car Links’ Category

Hot Rod, Street Rod, Rat Rod, or Custom Car Links

Subscribe to 1929fordhotrod.com

Your donations are appreciated

Pages

Contact Me Using Skype

1929 Ford Hot Rod Products

A calendar of 1929 Ford Hot Rod posts

Search the 1929 Ford Hot Rod site

Slideshow

1929 Ford Hot Rod Topics

Check out the older 1929 Ford Hot Rod posts on this Blog. Lots of great information.

Links

Tags

1929fordhotrod