1920′s | 1929fordhotrod.com

Posts Tagged ‘1920′s’

FOR SALE – Vintage 1920′s Rolls-Royce publications

Thursday, December 10th, 2009

1920′s Rolls-Royce

Dealer Book / Pamplet

For the 20 h.p. six cylinder

Rolls-Royce

$400 USD

This is used and shows signs of gentle use.

This is a 36 page booklet.

The picture on page 25 has a small corner torn off with the piece still there.

The rest of the booklet is in reasonable condition considering the age of this.

The index has the following:

Preface 3-6

Illustrations 7-25

List of prices 27

Specifications 28-29

Guarantee 30

Inspection and service 31

Terms of business 32

Selling representatives 33-36

Truely an amazing piece of history.

The outside cover is a bit dirty / worn, but the inside pages are okay.

A great resource. Again this is used, old and not in perfect condition.

To see more pictures of this booklet and a couple of other 1920′s Rolls-Royce bookets go to “Pages” at the top right of the main page of this blog and click on “FOR SALE – Vintage 1920′s Rolls-Royce publications”

For more information on these publications,

call Ron @ 519-633-8024 519-633-8024

in St. Thomas, Ontario, Canada.

Tags: 1920's, 1920's Rolls Royce, For Sale, Rolls-Royce, Vintage publications
Posted in For Sale | No Comments »

Subscribe to 1929fordhotrod.com
Enter your email address:
Delivered by FeedBurner
Your donations are appreciated
Pages
- About
- Contact Me
- 1928 – 31 Model A Ford frame dimensions
- 1930 Plymouth parts I removed and sold
- FOR SALE – Vintage Rolls-Royce publications from the 1920′s
- Preview of the 1929 Ford chassis with C4 Corvette suspension
- Products Page
Contact Me Using Skype
1929 Ford Hot Rod Products
- Custom 1928 to 31 Model A Ford Chassis Plans using C4 Corvette Suspension Componensts
- Stock 1928 to 31 Model A Ford Chassis Plans
A calendar of 1929 Ford Hot Rod posts
February 2012

S M T W T F S

« Jan

1 2 3 4

5 6 7 8 9 10 11

12 13 14 15 16 17 18

19 20 21 22 23 24 25

26 27 28 29
Search the 1929 Ford Hot Rod site

Search for:
Slideshow
1929 Ford Hot Rod Topics
- 1928-31 Model A Ford halogen headlight conversion
- 1929 Ford Roadster Body Modifications
- A Corvette engine for the 1929 Model “A” Ford Roadster Hot Rod
- A Steering Column for the Hot Rod
- Automotive Swap Meets
- Brookville Roadster – Great reproduction Ford bodies & parts
- Building a brake pedal assembly
- Building an Engine Pre-oiler
- Buying parts for your Hot Rod project
- C4 Corvette vacuum power brake booster
- Car Show & Cruises
- Chassis / Frame Design for the 1928 to 31 Model “A” Ford Street Rod
- Distraction while build a hot rod
- For Sale
- Having Fun
- Hot Rod Brake Lines
- Hot Rod Project Management 101
- Hot Rod Street Rod Rat Rod Custom Car Links
- In-expensive Hot Rods
- Model A Ford Body Topics
- Model A Ford Parts & Resource Links Page
- Money making distractions
- Mounting the Transmission into the 1929 Ford Model “A” Roadster Hot Rod
- My 1987 Corvette Convertible
- Polishing aluminum
- Power steering
- So you want to build a hot rod
- The 1929 Ford Roadster Body
- The 1931 Ford Model “A” 5 window coupe
- The Front Suspension for the 1929 Ford Roadster
- The money making game on eBay
- The Rear Suspension for the 1929 Ford Roadster
- Uncategorized
- Welcome back and hello 2010
Check out the older 1929 Ford Hot Rod posts on this Blog. Lots of great information.
- January 2012
- December 2011
- November 2011
- May 2011
- April 2011
- March 2011
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
Links
- 1929fordhotrod.com videos on YouTube
- 1986 Corvette
- 1986 Corvette Frame Dimensions
- Atchison Machine Service Inc.
- Atchison Racing
- Bristol Hotrods, England
- Brookville Roadster
- C4 Corvette Registry
- Canadian Rodder
- Cookingfromthehip.com
- Custom Car Builders
- Fleetwood Country Cruizein 2010
- Hot Rod Magazine
- Hot Rods and Classics
- Hotrodders.com
- Mike Siewert's Rod Links
- Northside Choppers
- Old Autos Newspaper
- Roadsters.com
- Rod & Custom Magazine
- Street Rod USA
- Street Rodder Magazine
- Throttle Gals Magazine
- Top 100 Hot Rod Sites.com
Link Master
Globe of Blogs
Tags
1928 - 31 Ford Model A frame 1928 - 31 Model A Ford chassis considerations 1928 - 31 Model A Ford frame considerations 1928-29 Ford Roadster 1929 Ford chassis 1929 Ford hot rod 1929 Ford Model A body modifications 1930 plymouth 1931 ford 1931 Ford 5 Window coupe 1931 plymouth 1986 Corvette 1986 Corvette Indy Pace car 1987 Corvette 1987 Corvette engine American Griffiti Brookville Roadster Build a hot rod build a hot rod frame buying hot rod parts C4 Corvette hot rod front suspension C4 Corvette hot rod suspension c4 corvette irs c4 corvette suspension Canada's Largest Outdoor Car Show Car building distractions Car Cruise In Car Shows Cruise In custom car building eBAy Fleetwood Country Cruise In Fleetwood Country Cruize In For Sale George Barris hot rod Hot Rod distractions Merry Christmas Model A Ford Old Autos Outdoor car show problems when building a hot rod rat rod Steve Plunkett Swap meets
1929fordhotrod
- Installing the 1986 C4 Corvette steering column in the Hot Rod
- Mounting the C4 Corvette Vacuum Assisted Power Brake Booster in the Hot Rod
- Merry Christmas – Birds of a Feather Christmas Video
- Designing a brake pedal assembly for the1928 – 31 Model A Ford
- A different idea for 1928 – 31 Model A Ford floors
- GM Type II Power Steering pump for the 1929 Ford hot rod
- 1928-31 Model A Ford Halogen Headlight Conversion
- What’s happening at 1929fordhotrod.com
- London / Lambeth Ontario Spring Swap Meet June 12th 2011
- Waterdown Ontario Spring Swap Meet & Car Show May 28th & 29th 2011

SEO Powered by Platinum SEO from Techblissonline

Chassis / Frame Design for the 1928 to 31 Model “A” Ford Street Rod – Part 1 A few years ago when I first came up with the idea of building a hot rod, a friend of mine told me that the project will change throughout the time of the build. I did not believe him at the time, and have started to realize the truth in what he mentioned to me. Remember, I started out with 2 cars, a 1930 and 1931 Plymouth. Now I have a 1930 Ford 5 window coupe. I started looking at the old vintage Model “A” Ford frame that came with the coupe. When I was moving it around the shop and yard, I noticed that it was not very solid. There was an incredible amount of twist in the frame whenever I picked it up from one corner at one of the ends of the frame. This was not acceptable for a modern day street rod. This might have been okay when the car was first built from 1928 to 1931 with an engine having only 40hp. Most small block Chevrolet, Ford, and Mopar engines have approximately 200hp stock depending on the model. This is 5 times the horsepower of the original Model “A” engine. Add a few engine modifications and all of a sudden you have over 400hp or ten times the horsepower of the original Model “A” engine. Some builders would say sure use the frame, but box it in. The original frame is a “C” channel frame with the cross members riveted to the side rails. Over time the frame gets a bit rusty, and the rivets will not be a tight as when the frame was first built. The front cross member often will have stress cracks. Boxing in the “C” channel requires welding a fitted metal plate to the inside of the side frame rails. If this is not completed carefully, the frame will warp and loose its alignment. This is not acceptable or safe. I have had builders come to my shop wanting to purchase the original frames for nostalgic purposes. This seems a bit contradictory if you are using any type of modern engine including an older flat head V8 engine. This in my mind is simply not safe and these sorts of builders give hot rodding a bad name when they build cars without any consideration for safety. Lately, many street rod builders would call this rat rodding. I have seen a few so called Rat Rods, in some very large international car shows that look to be absolute death traps. Don’t get me wrong, I like a well built and safe Rat Rod. I suppose you will hear all kinds of theories on this topic, and I have only expressed my opinion on the subject. I started looking at commercially made chassis’s / frames for street rods for my application and noticed that many consisted of 2” x 3” or 2” x 4” steel rectangular tubing. There were many variations for different types of front and rear suspensions. It was time to do a bit more reading and learn more about chassis engineering. It was back to the library and internet for me to do more research. Below are a few good reference books that I have and used for ideas. Street Rodders Chassis & Suspension Handbook By: Editors of Street Rodder Magazine Chassis Engineering By: Herb Adams Boyd Coddington’s How to Build a Hot Rod Chassis By: Timothy Remus Petersons Hot Rod Year Book No. 13 (I bought this book in 1975 and there is an interesting section on how to build a Street Rod using a Bucket “T” body) How to Build a Sports Car For as Little as 250 Pounds By: Ron Champion Street Rodder’s Handbook By: Frank Oddo Amazon.ca Widgets When I mentioned to my friend, the one I obtained the 1931 Ford coupe from, that I was considering building my own chassis, he did not think that was possible. I told him that I thought it would be relatively easy to do once I know what suspension I wanted to use. For the last 34 years I have been acquiring all kinds of tools, mostly, wood working equipment. Many times, I thought it was cheaper to buy the tool than to buy something pre-made. I made our first coffee table because we could not afford to buy one in the early days. Over the years made a fan back Windsor rocking chair, a Deacon’s bench, and all kinds of elaborate wooden toys from circus trucks to a complete train set. Renovations on our various homes over the years were big on the list. To have somebody else perform renovations in our house was out if the question. I bought the tools and opted to do the work myself. Remember, the library, it’s a fantastic resource to learn just about anything. This is the story of my life, learning how to do something, just because I could not afford to pay someone else to do it. This starts to become a problem. Knowing how to do so many things makes you reluctant to have people work for you. This is starting to change now, only because there is only so much time in the day and you cannot do everything yourself. The other issue is that not everything deserves equal billing. Some things are more worth while to do yourself and other times it is a lot simpler to leave it to the people who make their living doing a certain job. I have even progressed to the point I get our new car serviced, including the oil changed by the dealer on a regular basis. That’s an incredible step for me. Finally, after a considerable amount of time researching suspension and chassis designs for street rods, I came to the conclusion that I would use a C4 Corvette suspension for the front and back of the car. Now, I need to find the suspension parts. Chassis / Frame Design for the 1928 to 31 Model “A” Ford Street Rod – Part 2 After a considerable amount of thought and research, looking at commercial front and rear suspension components I made a decision. I felt that a more interesting route for my project would be to use C4 Corvette suspension components. Part of me always looks to do something just a bit different, and I always look for a challenge. Besides, I do not ever remember seeing a C4 Corvette suspension on the front of a Model “A” street rod. I am not saying it hasn’t been done, just that if it has, it is not very common. Many bigger street rods use the front suspension from a Corvette, and countless number of street rods, including Model “A” Fords uses the rear suspension. [caption id="attachment_159" align="aligncenter" width="400" caption="1986 C4 Corvette Indy Pace Car convertible bought on eBay and used as a donour car for the hot rod project. This has everything you need, front & back suspension, drivetrain, steering column, etc..."][/caption] The C4 Corvette uses a very well designed and good looking aluminum independent suspension on their cars. Aluminum is light and can be nicely polished to a brilliant shine. This is perfect for an open wheel street rod. The hub width between the brake rotors and using Corvette style/type of rims provides a prefect match to the Model “A” Ford body. Below are a few specifications of a 1986 C4 Corvette. - wheelbase: 96.2” - front track width: 59.6” - rear track width: 60.4” - ground clearance: 4.7” - convertible weight: 3266 lbs - front/rear weight distribution: 50.2%/49.8% The frame for the Model “A” Ford will need to be modified. It will need to be narrowed in the rear and slightly widened in the front. These changes will accommodate the C4 Corvette suspension components. I will talk in more detail about this later on. [caption id="attachment_160" align="aligncenter" width="400" caption="1986 C4 Corvette Indy Pace Car convertible - rear view - it doen`t have to look pretty, just have all of the parts you want in tack."][/caption] Now the search for the suspension components from a C4 Corvette has started. A check at the local wrecking yards did not produce anything. Then I started looking on the internet, more specifically, eBay. I started bidding on a few complete units from the front and back of a Corvette separately. There was a bit of a problem. Shipping these items is expensive, especially from the United States. These items are bulky and heavy. Most of the items I found were too far away to pick up myself. The search started to seem hopeless. Then I came up with the idea of purchasing a complete car. This started to make more sense very quickly. Some of the front suspension units had a finally selling price on eBay between $500 and almost $1000. The rear units sold for less. Add in shipping, and I would have been paying well over $2000 for the suspension components. This included having them shipped to the door. Some would say, not bad, since many of the commercial front suspension units start at $1500 and go up from there, depending on options, and how much chrome you would like. Of course you still need something for the rear of the car. [caption id="attachment_161" align="aligncenter" width="400" caption="1986 C4 Corvette Indy Pace Car convertible - engine compartment - a good engine for my application, but the TPI injection will be replaced with a standard 4 barrel carburator."][/caption] My search now changed to looking for a complete car. This would give me the suspension, a motor, transmission and lots of little bits and pieces required to build a street rod. I found a car in New York not to far from the Niagara Falls Ontario border crossing. This was perfect for me, since I was only 3 ½ hours away. I have never paid the asking price for anything I have ever bought and the dealer would not budge on the price of $3700. I could have even driven the car home. In hind site, this would have been okay and will need to explain this later on. Shortly afterwards, I found a wrecked 1986 Corvette convertible in Sterling Heights Michigan at a salvage yard and was only an 1 ½ hour away from my home. The car was hit on the rear driver’s side of the car. I bought the car for $2000. Now I had to arrange to get it home. A friend of mine had a pickup truck and we rented a U-Haul car trailer. If I had bought the car in New York, I could have driven the car home and made my life my simpler. I made a few phone calls to the Canadian and American Customs departments to make sure about the procedure with importing a vehicle into Canada. The Customs officials I talked to were extremely helpful. This was a very important step to ensure a stress free border crossing. Everything was all set, and away we went to pick up the car. The only problem I had was at the salvage yard I purchased the car from. They wanted to transfer the title of ownership to my name in the State of Michigan. I explained this was not necessary but they insisted on it. So I left with the car and a freshly printed Michigan title for a 1986 Corvette convertible. I even needed to pay their state taxes on the transaction. Again, something I did not count on and was not required to do. Oh well. Importing a car into Canada did not seem too difficult. In fact I have been across many times and had more difficulty crossing back into Canada with a car load of electronic equipment I purchased at an amateur radio flea market in Ohio. The car was unloaded from the trailer. This is when I discovered that the driver’s side rear half shaft in the rear end was sheared in the wheel hub. This was a result of the accident. Again, I started wishing I purchased the Corvette in New York. In the end, I paid almost $3500 to get the wrecked car into the driveway. This included the price of the car, foreign exchange, Michigan State taxes, taxes at the Canadian border, the rental of the trailer, gas money, and a bit of cash for my friend’s time. The New York car would have only been slightly more to get home with less transportation hassles and I would not need to search for the broken rear end parts. Everything is a lesson in life. We parked the car and started checking things over. It has almost everything I needed to build a street rod. The next challenge was to dismantle the car and dispose of everything I did not need. That will be the next part of the story and my hot rod build alone with the initial concept of a new frame for the Model “A” Ford using the Corvette suspension components. Come back next week to read more about the Chassis / Frame Design for the 1928 to 31 Model “A” Ford Street Rod and continue with part 3. Make sure you bookmark this site as I will be updating the blog regularly with new information. Amazon.ca Widgets

.